11. Protect the Power Cord – Route all power supply (mains) cords so that they are not likely to be
12. Take Precautions against Lightning and Power Line Surges – To prevent damage to this product
13. Do not defeat the safety purpose of the polarized or grounding-type plug – A polarized plug has
14. Servicing – Do not attempt to service this unit yourself as opening or removing covers may expose to
15. Obtain Service When It Is Indicated – Unplug the unit from the outlet. The product should be
2. Declarations of Conformity
3. Caution
walked on or pinched. Pay particular attention to cords at plugs, at outlets on the product, and at the
point where the cord connects to the product.
during a lightning storm, or if the product will not be used for an extended period of time, unplug its
power cord from the wall outlet and disconnect the antenna or cable system.
two blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. When the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
serviced only by authorised service personnel when:
A. the power supply cord or the plug has been damaged, or
B. objects have fallen or liquid has spilled into the product, or
C. the product has been exposed to rain or water, or
D. the product does not appear to operate normally or exhibits a marked change in performance. Adjust
only those controls which are covered by the instructions for use, as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the units to their normal operation, or
E. the product has been dropped or the cabinet damaged.
The manufacturer of this amplifier hereby declares that this product is in accordance with the following
standards:
EMC Directive 2004/108/EC (Electromagnetic Compatibility)
EN-55103-1:1996
EN-55103-2:1996
Low Voltage Directive 2006/95/EC (Safety)
EN/IEC60065:2002 7th edition
To reduce the risk of electrical shock, do not remove the cover. There are no user serviceable parts inside,
refer all servicing to qualified personnel. If opened by qualified personnel, disconnect the amplifier
completely from the main power. Replace fuses only with same type. Avoid damaging the AC plug or
cord. It can potentially causing a shock hazard. The unit should only be connected to an AC power
supply of the correct voltage. Damage caused by incorrect power voltage is not covered by warranty.
To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Do not use
this unit in damp areas or near water.
The amplifier must be adapted slowly to extreme temperature changes. These extreme changes can
cause moisture development inside the amplifier that can cause failure and/or electrical shock.
2. Declarations of Conformity
5