Cleaning And Care - Klarstein DEEJAY Mode D'emploi

The induction cooker can detect cookware automatically. Please test your
cookware: place the chosen cookware in the heating area. If the LED display
relevant to the cooking area remains unchanged or when the buzzer remains
silent, this means that the cookware is suitable for this induction cooker. Under
single mode or dual hob mode, if [E0] occurs, and the buzzer sounds, this
means that the cookware is inappropriate for this induction cooker. The cooker
automatically switches off after 30 seconds.
Sounds: There may be sounds when using cookware with a multi-ply bottom. This
is due to the rattling of different materials in different cooking zones. Choosing
appropriate cookware may reduce this problem.
Sharp piercing sound: When using cookware made of two different materials in
adjacent areas on the hotplate during Flex Induction or dual hob mode, a sharp
piercing sound may be heard, which is caused by different vibration frequencies in
the heating zone. Choosing appropriate cookware may reduce this problem.

CLEANING AND CARE

• Before cleaning, disconnect plug and wait until the appliance is cooled down
completely.
• If dirty pots/pans are used, discolouration on the cooking zones may result.
• Do not use benzene, thinner, scrubbing brush or polishing powder to clean
the induction cooker.
• Wipe using a damp cloth with dish washing detergent.
• Use a vacuum cleaner to clear the dust from the air intake and exhaust vent.
• Never run water over the unit (the induction cooker may malfunction if water
enters its interior).
EN
23