SPORTSTECH CX625 Manuel page 42

2. Front and Rear Stabilizers Installation
Remove two M8x50 Bolts (113), two Ø8x Ø16 Washers (53) and two Ø10x Ø20 PVC washer(21)
from Front Stabilizer (7) . Remove two M8x50 Bolts (113), two Ø8x Ø16 Washers (53) and two
Ø10x Ø20 PVC washer(21) from Rear Stabilizer (8) .
Position the Front Stabilizer (7) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (7) onto the front curve of the Main Frame (1) with two M8x50
Bolts (113), two Ø8x Ø16 Washers (53) and and two Ø10x Ø20 PVC washer(21) that were
removed.
Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (8) onto the rear curve of the Main Frame (1) with two M8x50
Bolts (113), two Ø8x Ø16 Washers (53) and two Ø10x Ø20 PVC washer(21)that were removed.
42