Symbols - Kobalt 0832476 Mode D'emploi

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS NAME
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
Alternating Current
Direct Current
Class II Construction Double-insulated construction.
/min Per Minute
Wet Conditions Alert Do not expose to rain or use in damp locations
Read The Operator's
Manual
Eye Protection
Safety Alert
Long Hair
Loose Clothing
Keep Bystanders
Away
Blower Tubes
Impeller Blades
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Revolutions, strokes, surface speed, orbits etc., per minute
To reduce the risk of injury user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 when operating this equipment.
Precautions that involve your safety.
Failure to keep long hair away from the air inlet could result in
personal injury.
Failure to keep loose clothing from being drawn into air intake
could result in personal injury.
Keep all bystanders at least 50 ft. away.
Do not operate without tubes in place.
Rotating impeller blades can cause severe
injury.
4