Symbols - Kobalt KHB 400B-06 Mode D'emploi

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
Alternating Current
Direct Current
/min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye and Hearing Protection
Safety Alert
Long Hair
Loose Clothing
Keep Bystanders Away
Blower Tube
Impeller Blades
Class II Construction
DESIGNATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Revolutions, strokes, surface speed,
orbits etc., per minute.
Do not expose to rain or use in damp
locations.
To reduce the risk of injury user must
read and understand operator's manual
before using this product.
Wear eye protection that is marked
to comply with ANSI Z87.1 as well as
hearing protection when operating this
equipment.
Precautions that involve your safety.
Failure to keep long hair away from the
air inlet could result in personal injury.
Failure to keep loose clothing from
being drawn into air intake could
result in personal injury.
Keep all bystanders at least 50 ft. away.
Do not operate without tube in place.
Rotating impeller blades can cause
severe injury.
Double-insulated construction.
kobalttools.com
4
EXPLANATION