Operating Instructions; Harness Adjustment - Kobalt 0832476 Mode D'emploi

OPERATING INSTRUCTIONS

1. HARNESS ADJUSTMENT

A well adjusted backpack blower and harness
makes work easier. Adjust the harness to give you
the best working stance. Adjust the side straps so
the weight is equally distributed across your shoul-
ders.
a. Once the blower is properly fitted on your back,
pull the ends of the straps downward to tighten
the harness.
b. Connect the horizontal chest strap, and pull the
end of the strap to tighten.
c. Lift the tabs of the adjusters to loosen the straps.
d. Close and lock the quick-release fastener by
pushing it together.
e. Squeeze the hooks to open the quick-release
fastener.
2. PUT ON THE SHOULDER STRAP
• Adjust the harness straps (1) to the correct length.
• Adjust chest strap (2) to correct length and fasten
it together.
Note: The backpack blower must be quickly re-
moved in the event of imminent danger. The chest
strap must be released before putting the backpack
blower on the ground.
3. HOLDING THE TOOL
• The operator should wear proper clothing, such
as boots, safety glasses or goggles, ear/hearing
protection, gloves, long pants and a long-sleeved
shirt.
• This backpack blower is designed to be operated
with one hand.
• The user can carry it holding the control lever with
the left or right hand.
• Always walk slowly while working.
• Always check the blowing nozzle outlet area.
6
a
7
8
11
b
c
2
1
1
d
e