Kobalt 0832476 Mode D'emploi page 12

OPERATING INSTRUCTIONS
4. Starting/stopping the blower
• Ensure that the battery is installed in the blower.
• Squeeze the trigger (N) to start the blower.
• To change speed, squeeze the trigger to increase
the speed and release the trigger slightly to
decrease the speed.
• Release the trigger completely to stop the blower.
5. Using cruise control lever
This blower is equipped with a cruise control
function.
• Squeeze the trigger (N) to start the unit.
• Once the unit is on, pull back the cruise control
lever (O) clockwise to increase the speed. This will
lock the speed at the desired setting.
• To decrease the speed, push the cruise control
lever (O) counterclockwise to decrease the speed
to the desired setting.
Note: If you decrease the speed all the way, the unit
will shut off and step one will need to be repeated.
6. Using turbo button
This blower is equipped with a turbo button (P).
Please read and understand the function of the turbo
button.
• Squeeze the trigger (N) to start the unit.
• To boost speed, press the turbo button (P) so that
the blower can be operated at the highest speed.
Once the turbo button (P) is released, the blower
will be operated at the normal speed.
7. Operating the blower
• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into
the center of a pile.
• To reduce sound levels, limit the number of pieces of equipment used at any one time.
• Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen
surfaces when water is available.
• Conserve water by using power blowers instead of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills, porches, and gardens.
• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.
• After using blowers or other equipment, clean up. Dispose of debris properly.
Note: Never cover air vents. Keep them free of obstructions and debris. They must always remain
clear for proper motor cooling.
9
O
12
P
N