Wireless Subwoofer; Back Panel Of Subwoofer; Pair Up With The Subwoofer - Magnavox MSB4560 Guide D'utilisation

3.3 Wireless Subwoofer

3.3.1 Back panel of Subwoofer

The SoundBar comes with a wireless subwoofer.
a CONNECT (connect)
Press to to enter the pairing mode for the
subwoofer.
b Subwoofer indicator
• When the power is turned on, the
indicator lights up.
• During wireless pairing between the
subwoofer and the main unit, the
indicator blinks white quickly.
• When the pairing succeeds, the
indicator lights up white.
• When the pairing fails, the indicator
blinks white slowly.
• When wireless connection is
disconnected for one minute, the
indicator turns off.
c AC MAINS~
Connect to the power supply.
EN
7

3.3.2 Pair up with the subwoofer

The wireless subwoofer automatically pairs up
with the SoundBar for wireless connection when
you turn on the SoundBar and the subwoofer.
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1
Turn on the SoundBar and the subwoofer.
• if the connection to the SoundBar is
lost, the indicator on the subwoofer
blinks white slowly.
2
Press the CONNECT button on the
subwoofer to enter the pairing mode.
• The indicator on the subwoofer blinks
white quickly.
3
On your remote control, press AUX
button, then long Press PAIR button for 3
seconds.
• All the indicators on the front panel of
main unit blink back and forth.
• The LED on subwoofer will blinks
quickly during paring.
4
If the paring succeeds, the indicators will
show as below.
• The five indicators on the front panel
of main unit light up for two seconds,
then light off.
• The indicator on the subwoofer will
stop blink and stay on
5
If the pairing fails, repeat the steps 1 to 3.
• The five indictors on the front panel of
main unit blink twice.
• the indicator on the subwoofer blinks
white slowly.
white.