Use Your Soundbar; Adjust The Volume; Choose Your Sound; Play Audio Through Bluetooth - Magnavox MSB4560 Guide D'utilisation

5 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the SoundBar to the correct source
for other devices.

5.1 Adjust the volume

1
Press +/- (Volume) to increase or decrease
a volume level.
• To mute sound, press
control.
» When the mute on, the POWER
indicator on the front panel of main
unit blinks in red.
» When the mute off, the POWER
indicator stop blink and light off.
• To restore the sound, press
press VOL +/-.
2
To increase or decrease volume, press VOL
+/- on remote control.
POWER AUX
0
• When press VOL+, the indicators on
the front panel light up from left to
right.
when press VOL-, the indicators on the
•
front panel light up form right to left .
• All indicators on the front panel blink
twice when the volume is set to either
minimum or maximum.
Note
•
The volume might be influenced by MP3 or Bluethooth
player.
on remote
again or
INPUT
LINE OPTICAL PAIR
32

5.2 Choose your sound

Select predefined sound modes to suit your
video or music.
Press sound setting buttons on remote control
to select a sound mode.
» When a button is pressed, the POWER
indicator blinks once.
MUSIC: Recreate the original recording
•
environment of you music,in the studio or
at a concert.
MOVIE: Enjoy a cinematic audio experience,
•
specially enhanced for movies.
NEWS: Hear every word with optimized
•
speech and clear vocals.
• CLASSIC: Flat and pure sound mode. Ideal
for listening to classical music.
5.3 Play audio through
bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports version
as 3.0 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to switch
the SoundBar to Bluetooth mode.
PAIR INPUT indicator on the
» The
front panel of main unit blinks slowly.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
MAGNAVOX MSB4560 (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
3
When the Bluetooth connection succeeds,
the Bluetooth indicator lights up.
• If no any bluetooth device is connected
in two minutes, press PAIR on remote
control to activate the paring mode
again.
EN
10