Coffee Machine - KOTTEA CK500 PRO 1 Mode D'emploi

INSTALLATION

COFFEE MACHINE

• Open the carton box, take out machine and spare parts. The machine and all accessory units are only
permitted to be installed and stored in frost-free locations.
• Take out machine and accessories, install the cooler at the right side of coffee machine .
√ Machine Installation
MILK TUBE INSTALLATION
Step 1: lnsert milk tube into milk tube connection
Step 2 : lnsert the milk tube on the drip tray. Installation is complete.
√ Milk tube installation is complete.
CONNECTION
Water inlet tube connection -Soft metal tube connection.
Step 1: Connect the end of tube with the water intake, tum the screw nut clockwise.
46
Step 2: Insert the other end of pipe into the barrel water of connect it to the tape water .
WATER INLET TUBE CONNECTION-SILICON TUBE
Step 1: Pull out plug;
Remark : Insert the other
Step 2: Insert the Type L pole into the connection,and another end to the water barrel.
end of milk tube into milk
box.
Remark : If the machine
supplies with cooler, insert
the : end of milk tube into
the milk tube connection
on the coffee machine
√ Silicon tube connection is complete.
Remark: Please switch the valve to water tank while using water tank.
Please switch the valve to water barrel while using water barrel.
Soft metal tube connection is complete.
Water tank
GB
Water barrel
47