Fm Radio Mode; Charging Instructions; Wireless Microphones - NGS WILDDISCO Manuel D'utilisation

Table des Matières

Publicité

USER'S MANUAL

FM RADIO MODE

1. Press the MODE button to enter the FM radio mode.
2. Then press and hold the play/pause button to carry out an
automatic channel search.
3. Once the automatic search is completed, you can switch
between the saved stations by pressing the PREV/NEXT
buttons.

CHARGING INSTRUCTIONS

This speaker has a high capacity 12V battery. Please use a
15V/2A power adapter for charging. The charging indicator
light on the back of the unit flashes to indicate taht it is
charging. It takes 4-8 hours for the battery to reach full
charge. Disconnect the adaptor as soon as battery is fully
charged (charging indicator light remains steady on). Battery
run time: 3 hours.
6
BUILT-IN RECORDING FUNCTION
1. Plug in a microphone to the MIC IN input
2. Insert USB/SD card into the corresponding port, press
MODE button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first
time, the system will automatically create a folder named
VOICE to save recorded files (FAT32 USB file system is
supported).
4. When you are ready to record, press REC button to go to
recording mode. The current sound output will stop and
go to mute status, screen shows "RECORDING". The device
starts recording when the screen shows 00:01 and users
can use the microphone to record.

WIRELESS MICROPHONES

Insert the batteries into the mics and turn the power switch
to ON. Adjust the volume and echo on the rear panel.

Publicité

Table des Matières
loading

Table des Matières