► The motor and internal gears of your can opener unit are permanently
lubricated at the factory for lifetime service and require no further
attention. The cutting blade is made of hardened steel and will last for
years under normal use. Do not attempt to sharpen.
15 Troubleshooting
This chapter provides you with important notices with regard to operating
the device. Observe the following notices to avoid dangers and damages:
15.1 Security advices
► Repairs of electrical appliances must be carried out by qualified
personnel who are trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable
hazards for the user and damage the machine.
15.2 Troubleshooting
Error
The can opener
doesn't work.
Blades don't
become sharp.
► If above mentioned steps don't solve the problem, please contact your
customer service.
16 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable
materials. However, they also contain damaging substances, which were
necessary for their functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly,
they could be detrimental to human health and the environment.
Caso D10
Please note
Attention
Possible cause
Mains plug is not connected
correctly.
Contact of the lever is defect.
Cutting blade is worn.
Attention
Troubleshooting
Plug into the mains.
Contact the customer service.
Contact the customer service.
35