Table Des Matières - GreenWorks GD60BCB Manuel Opérateur

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
2 Safety.................................................. 4
3 Installation......................................... 4
3.1 Unpack the machine.......................................... 4
3.2 Attach the guard.................................................4
3.3 Assemble the shaft.............................................4
3.4 Attach the auxiliary handle................................4
3.5 Install the battery pack.......................................5
3.6 Remove the battery pack................................... 5
4 Operation........................................... 5
4.1 On/off button..................................................... 5
4.2 Speed button...................................................... 5
4.3 Start the machine............................................... 5
4.4 Stop the machine............................................... 5
4.5 Use the shoulder strap........................................5
4.6 Operation tips.................................................... 5
4.7 Cutting tips........................................................ 6
4.8 Adjust the length of the cutting line.................. 6
English
4.9 Line cut-off blade.............................................. 6
4.10 Adjust the cutting diameter................................6
5 Maintenance.......................................6
5.1 General information...........................................6
5.2 Clean the machine............................................. 6
5.3 Remove any remaining line............................... 6
5.4 Install the cutting line........................................ 7
5.5 Remove the trimmer head..................................7
5.6 Assemble the trimmer head............................... 7
5.7 Remove the brush-cutter blade.......................... 7
5.8 Assemble the brush cutter blade........................ 7
6 Transportation and storage.............. 7
6.1 Move the machine............................................. 7
6.2 Store the machine.............................................. 7
7 Troubleshooting................................. 8
8 Technical data.................................... 8
9 Warranty............................................ 9
10 EC Declaration of conformity.......... 9
3
EN