Reversible Door - INVENTOR MP862W Manuel D'utilisateur

Reversible Door

The door opening can change from either the left or the right side, according to what
is best suited for its location. Ensure there is enough adequate space for the door to
open fully. To change the door opening direction, please follow the mentioned below
instructions:
Required tools:
Head Screwdriver / Slot head Screwdriver / Hexagonal Spanner
• Before reversing the door swing, unplug the appliance from the power supply
and remove goods from fridge.
2.
Remove the plastic cover located on
the top right or left (depending on initial
door installation side) of the door hinge,
and unscrew the two screws with the
stabilizing pin.
EN
1.
Adjust the leveling foot to its highest
position. Tilt the unit slightly backwards to take
so that it will not slip during the door reversing
process.
damage the coolant system.
3.
Slightly tilt so that you may have
access to the front bottom bracket.
Unscrew the two screws located on
the bottom left or right (depending
on initial door installation side)and
remove the foot from the opposite
side. Once top and bottom screws and
also the opposite foot are removed,
the door will be completely released.
11