Installtion; Reversing The Door Swing - INVENTOR INVMS67A Manuel D'utilisateur

2. INSTALLATION
2.1 Location
ambient temperatures may cause the unit to operate improperly. This unit is not designed for use in
When installing the unit be sure to allow enough open area around all sides (20 cm from the top, 15cm
from the back and 40 cm from the sides). This will allow air to circulate around the wine cooler and
fully.

2.2 Reversing the Door Swing

Tools Required: Phillips head screwdriver / Slot head screwdriver / Hexagonal spanner
If you want to have the door swing reversed, we recommend that you contact a
quali ed technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
Ensure the unit is unplugged and empty.
Adjust the two leveling feet to their highest posi on.
d
something solid so that it will not slip during the door reversing process.
All parts removed must be saved for the reinstalla on of the door.
Do not lay the unit at as this may damage the coolant system.
We recommend that 2 people handle the unit during assembly.
1) Remove the plas c covering from the top door hinge.
2) Unscrew the three screws from the bo om bracket.
Remove the foot from the opposite side.
3) Place parts aside.
You should rest the unit on
2