Hoover FLOORMATE STEAMSCRUB 2-IN-1 WH20440 Serie Mode D'emploi page 18

Using tile and grout scrub brush and SteamStream
1
Place foot on outer floor
head and gently pull
away steam mop to
release the tile and grout
scrub brush.
15
2
Move steam mop back
and forth across the floor,
getting into corners and
awkward places.
3
To engage SteamStream™ from the front nozzle,
press the SteamStream™ button to activate, and
squeeze the trigger to release steam. Press the
SteamStream™ button to turn OFF (0=OFF).
:
™
WARNING
!
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam
Trigger without water in the water tank.
WARNING
!
Scrub brush bristles may damage
wood floors.
• IMPORTANT •
Always switch off the steam mop before
attaching or removing the floor head.
• IMPORTANT •
Scrub brush only recommended for tile and
grout cleaning only.
!
!