Before You Begin Cleaning - Hoover FLOORMATE STEAMSCRUB 2-IN-1 WH20440 Serie Mode D'emploi

Before you begin cleaning:
Filling the twin tanks
WARNING
!
To avoid the risk of personal injury - Turn off,
unplug, and allow steam cleaner to cool before
servicing or filling water or solution tank. Do
not use hot or boiling water to fill water tank.
1
Press the water tank
release buttons and pull
the water tank to remove.
• IMPORTANT •
!
DO NOT MIX HOOVER
STEAM MULTI-FLOOR CLEANING
SOLUTION WITH ANY OTHER
CLEANING SOLUTION.
2
Pull the tab on the water
tank cap to open.
• IMPORTANT •
DO NOT ADD SOLUTION TO
WATER TANK.
NOTE: When the tank
4X
®
is turned upright it may
allow a few drops to drip
from cap. This is normal.
3
Fill the water tank with
water only to fill line,
replace the cap and push
firmly to close.
• IMPORTANT •
If you don't want to use
solution on your flooring,
turn solution dial to OFF
position.
Always test on an
inconspicuous area of
flooring first before
using solution.
4
Slide the water tank back
into the machine until it
clicks into place.
8