Features - Bostitch CAP1512-OF Manuel D'instructions Et D'entretien

FEATURES OF THE BOSTITCH CAP1512-OF
A. Pressure Switch: - The pressure switch is
the activation mechanism that is used to
start and stop the compressor. When the
switch is "On", the motor and pump will
E
D
compress air until tank pressure reaches the
upper limit of the factory set operating
pressure. When tank pressure falls below
the factory set "cut in" pressure, the
compressor will again automatically start to
compress air.
C
B
A
B. Tank Pressure Gauge: The tank pressure
gauge indicates the air pressure that is
present in the tank in PSI (lbs/sq. in.).
C. Regulated Pressure Gauge: The
regulated pressure gauge indicates the
amount of pressure that is allowed into the
discharge line according to the setting of the
regulator.
D. Regulator Knob: The regulator knob is used to adjust the air pressure that is available at
the discharge line. The discharge air pressure is increased by turning the knob clockwise
and decreased by turning the knob counter clockwise.
E. Drain Valve: Ball style valve that drains moisture from the tank when opened.
7