Cleaning Instructions - Waring Commercial WSM10L Mode D'emploi

Remove the agitator from the planetary shaft by lifting it upward,
then rotating it counterclockwise until it is unlocked. Lower the
agitator and remove from the planetary shaft.
Push each bowl clamp backward to unlock the bowl from the
bowl cradle.
Lift up slightly on bowl, so it clears pins on the bowl cradle.
CAUTION
Most batches are heavy. Always use two people to remove and
transport the loaded bowl after mixing is complete.

CLEANING INSTRUCTIONS

• Dilute detergent per supplier's instructions.
• DO NOT hose down or pressure-wash mixer.
• NEVER use a scrubber pad, steel wool, or abrasive material to
clean mixer.
• NEVER use bleach (sodium hypochlorite) or bleach-based cleaner.
• ALWAYS remove the agitator after each batch, as the agitator can
become stuck on the shaft and will be difficult to remove.
12