Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
USB Wall Plug Transormer "SPAS-2100"
Item No. 2282657
Intended use
The product is used to provide power or to charge end devices via a standard USB connec-
tion.
The current circuit of the connected load must not exceed the output current of the wall plug
transformer.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB wall plug transformer
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
This symbol indicates that the product meets the energy efficiency requirements for
Class VI.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons. Never dismantle the product.
• The product is not a toy. Devices operated using mains voltage do not belong in
the hands of children. Therefore, be especially careful when children are around.
Use the product where it is out of the reach of children.
• The product is intended for use only in dry, indoor locations. The product must
not become damp or wet; never handle it if your hands are wet! There is a life-
threatening hazard through an electric shock!
• Use only a standard mains socket as the power source for the USB wall plug
transformer.
The mains socket into which USB the wall plug transformer is plugged must be
easily accessible.
• Never use the product immediately after it has been taken from a cold room to a
warm one. The condensation that forms might damage the product under certain
circumstances. Furthermore, this could cause a lethal electric shock!
Allow the product to reach room temperature before connecting it to the power
supply and putting it to use. This may take several hours.
• Avoid the following adverse conditions at the installation location and during
transport:
- Excessive humidity or dampness
- Extreme cold or heat, direct sunlight
- Dust or flammable gases, fumes or
- solvents
- Strong vibrations, impacts or blows,
- Strong magnetic fields such as those found in the vicinity of machinery or
loudspeakers
• Do not pull the USB wall plug transformer from the mains socket by pulling on
the USB cable connected. Hold it on the sides of the casing and pull it out of the
mains socket.
• Operating instructions
• When using the product, make sure that sufficient air circulation is ensured and
do not cover the product.
• Always place the cable carefully so that nobody can trip over it. Risk of injury.
• Never pour liquids on electrical devices, and never place any liquid-containing
objects (such as vases) on top of them or near them. You run the risk of causing
a fire or a fatal electric shock.
• If the USB wall plug transformer is damaged, do not touch it; there is a life- threat-
ening electric shock hazard!
First, switch off the mains voltage to the socket to which the USB wall plug trans-
former is connected (switch off at the corresponding circuit breaker or remove the
safety fuse or switch off at the corresponding RCD protective switch, so that the
socket is fully disconnected).
You can then unplug the USB wall plug transformer from the mains socket. Dis-
pose of the faulty wall plug transformer in an environmentally friendly way, do not
use it any more.
• Do not leave the packaging material carelessly lying around, since it could be-
come a dangerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
Getting Started
• Connect a USB cable to the connection on the wall plug transformer.
The permanent output voltage of 5 V/DC of the wall plug transformer must cor- re-
spond to the input voltage of the electrical load that is connected to the wall plug
transformer.
If this is not observed, both the connected load and the transformer may be dam-
aged, resulting in loss of warranty!
• Plug the wall plug transformer into a standard mains socket.
• If the load has an on/off switch, switch the load on now. If the load does not function cor-
rectly, switch it off immediately and check the correct cable connection.
• In spite of the low standby power input, it is recommended to disconnected the USB wall
plug transformer from the mains socket if you don't use it any longer.
Maintenance and cleaning
The USB wall plug transformer does not require any maintenance and should never be disas-
sembled for any reason.
Pull the wall plug transformer from the mains socket before cleaning. Use a clean, dry, soft cloth
for cleaning. Do not use aggressive cleaning agents, as these can cause discolouration. Do not
press too strongly on the surface when cleaning, to prevent scratch marks.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the envi-
ronment.
Technical data
Model identifier
Input voltage
Input AC frequency
Output voltage
Output current
Output power
Average active frequency
Efficiency at low load (10%)
No load power consumption
Commercial registration number:
Manufacturer:
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
SPAS-2100
100-240
V
50-60
Hz
5.0
V
2.1
A
10.5
W
82.8
%
71.5
%
0.07
W
HRB 3896
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau
*2282657_v1_0820_02_jc_m_en
Publicité
