Additional Safety Rules; Symbols; Safety Symbols - skilsaw SPT55 Consignes De Fonctionnement/Sécurité

WARNING
Rules And Precautions That Appear In Your Owner's Manual. They Serve As A Reminder
Of All Safety Rules Needed For Safe Operation Of This Chain saw.

Safety Symbols

The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding. The
symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings
they give are no substitutes for proper accident prevention measures.
WARNING
"WARNING," and "CAUTION" before using this tool. Failure to following all instructions
listed below may result in electric shock, fire, and/or serious personal injury.
The definitions below describe the level of severity for each signal word. Please read the manual
DANGER
WARNING
CAUTION
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead to equipment
or other property damage if they are not followed. Each message is preceded by the word
"NOTICE", as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.
6

Additional Safety Rules

The Warnings Shown Below Can Be Found On Your Tool. These
Warnings Are Only A Condensed Form Of The More Detailed Safety
Be sure to read and understand all safety instructions in this Owner's
Manual, including all safety alert symbols such as "DANGER,"
and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate injury.
WARNING
which can result in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses with side shields
and a full face shield when needed. We recommend a Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side
shields. Always use eye protection which is marked to comply with ANSI
Z87.1.

Symbols

The operation of any power tools can result in
foreign objects being thrown into your eyes,