Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DS 60190 IN
BLUE
YELLOW/GREEN
THE CLASS 2 HOOD MUST NOT BE EARTHED
Second class hoods with the characteristics label containing the double square symbol.
The connection should be made as follows;
BROWN
BLUE
NOTICE OF INSTALLATION
• Before installation, please ensure the area is clean to avoid suction of the remaining bits of broken wood
and dust.
• It cannot share the same air ventilation tube with other appliance such as gas tube, warmer tube, and
hot wind tube.
• The bending of ventilation tube should be≥120°, parallel or above the start point and should be
connected to the external wall.
• After installation, make sure that the extractor is level to avoid grease collection at one end.
USE
Speed adjustment .See pictures
Push button
1. Push stop button, and the motor will stop.
2. Push the Low button, the buzzer will buzz once, and the motor runs at low speed.
3. Push the high button, the buzzer will buzz once, and the motor runs at mid speed.
4. Push the High button, the buzzer will buzz once, and the motor runs at high speed.
5. Push the light button and the two lights will come on. Push it again and the light will turn off.
MAINTENANCE
1 The cleaning of the carbon grease filter mesh
=
N (neutral)
=
Earth
=
L (live)
=
N (neutral)
pi c6C
pi c6C
pi c6C
14
Publicité
Table des Matières
