General Information - Dimplex Vivente VVT75 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
WARNING: In order to avoid overheating, do not cover the appliance. Do not place material or
garments on the appliance, or obstruct the air circulation around the appliance.
The appliance carries a DO NOT COVER warning symbol.
This appliance is equipped with a device to control the room temperature. Do not use this
appliance in small rooms when they are occupied by persons not capable of leaving the
room on their own, unless constant supervision is provided.
Dimplex Vivente Electric Fire
Models: VVT 75 , V V T1 0 0 , V V T1 5 0
Thank you for choosing a Dimplex electric fire.

General Information

CAUTION: Ensure installation does not allow fireplace to be in direct contact with building vapour
barrier or insulation and meets all local building code.
WARNING: To reduce the risk of fire, do not store or use gasoline or other flammable vapors or
liquids in the vicinity of the heater.
1. Select a location that is not susceptible to moisture and is away from drapes, furniture and high
traffic.
2. Unpack the fireplace and accessories from the box.
NOTE: Leave the front glass and partially reflective glass, safely, in the box until ready for
!
installation.
3. Store the fireplace in a safe, dry and dust free location until it is ready to be installed.
This electric fire is designed to be installed into a solid construction – such as an existing chimney
breast or plaster board construction. The installation of this product should be carried out by a
qualified professional.
There are several options for displaying the fire, including:
- Choice of background panel
- One, Two or Three-sided installation
- Materials to be placed onto the fuel bed
Please follow these instructions to assist you in the installation and operation of this product.
Technical Information
Heat Output
Nominal Heat Output
Minimum Heat Output
Maximum Continuous Heat Output
Auxiliary Electricity Consumption
In Standby Mode
with electronic room temperature control.
230V
P
1.4
Nom
P
1.3
min
P
1.4
max
el
0.49
SB
3
240V
1.5
kW
1.4
kW
1.5
kW
0.49
W

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vivente vvt100Vivente vvt150

Table des Matières