General Information; Technical Information - Dimplex Opti-myst ENGDL20 S E Mode D'emploi

Warning:
In order to avoid overheating, do not cover the appliance. Do not place material or garments
on the appliance, or obstruct the air circulation around the appliance, for instance by curtains or furniture,
as this could cause overheating and a fire risk. The appliance carries a DO NOT COVER warning.
Warning:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a circuit that
is regularly switched on and off by the utility.
Model: OMWFC20 E / RTOPW20 E / PEM20 E
Thank you for choosing a Dimplex electric fire

General Information

The fire incorporates a flame effect, which can be used with or without heating, so that the comforting
effect may be enjoyed at any time of the year.
A fan heater can provide heating in cold weather. A distance of 1 metre (3 feet) must be maintained
between the front of the heater and any surrounding furniture, overhanging curtains or other obstructions.
Always ensure that the appliance is sitting on a level surface. Before connecting the appliance, check that
the supply voltage is the same as that stated on the appliance.
Only use filtered water in this appliance.
Once installed, never move this appliance or lay it on its back, without draining the water from sump and
water tank. The water tank, sump, sump lid, tank cap and air filters must be cleaned once every 2 weeks,
particularly in hard water areas. If you intend not using the appliance for longer than 2 weeks, drain the water
from sump and water tank and dry the sump.
Please note:
Used in an environment where background noise is very low, it may be possible to hear a
sound which is related to the operation of the flame effect. This is normal and should not be a cause for
concern.
The sump and the water tank in this product are treated with a biocidal product, Silver Biocide in order to
control harmful or unwanted organisms. This conforms with the latest relevant ISO standard.
Do not drink the water from the sump or from the water tank(s).

Technical Information

Model No: OMWFC20 E / RTOPW20 E / PEM20 E
Heat Output
Nominal Heat Output
Minimum Heat Output
Maximum Continuous Heat Output
Auxiliary Electricity Consumption
In Standby Mode
Dimplex Opti-myst Stoves
P
Nom
P
min
P
max
P
Nom
230V 240V
1.8 2.0
0.9 1.0
1.8 2.0
0.45 0.48
kW
kW
kW
kW
4