Conceptronic SP1394C Guide De Démarrage Rapide page 13

ENGLISH
5. Troubleshooting Windows 98/ 2000/ ME
If you have picture problems under Ulead Software we strongly recommend you not
to use the default driver but an update which is available at our website.
6. External device installation
1. Connect external device to IEEE1394 cable adapter, and then connect the 1394
external device to a power source if necessary.
2. Windows will automatically install the driver. Insert your original Windows
CD-ROM into the CD-ROM driver, and click "Next".
3. After Windows has recognized the device, click "Finish".
4. Install Ulead application software while your IEEE 1394 Video device is
connected and installed.
5. Now the external IEEE 1394 device is ready to use.
Notes
The CardBus IEEE 1394 P C Card does not support PCMCIA Hot Swapping.
Therefore, you must disable the card before extracting it from the PCMCIA slot.
Once the card is extracted, you must reboot your system before again inserting the
card into your notebook PC.
- 13 -