Conceptronic SP1394C Guide De Démarrage Rapide page 12

ENGLISH
2. After installation reboot your laptop PC to activate the driver.
3. Now the 1394 Card is ready to connect to an external IEEE1394 device.
4. You can check if the installation is OK by going to 'My computer' – 'Control
Panel ' - 'System' – 'Device Manager'. If you see the "IEEE 1394 Bus Controller /
Texas Instruments OHCI Compliant IEEE 1394 PC Host Controller" here, the
card is ins talled succesfully.
4.4 Installing the Ulead videostudio software
Put the CD-ROM in the CD-ROM drive. Click 'Install'. Choose your language and
continue all steps by clicking 'Yes' and 'Next'.
When you want tot replace edited visuals into your camera, your camera needs to
support the so-called 'DV-in' 'I-link' or 'FireWire' function. Contact the installation
guide or supplier of your camera if your camera supports this function.
It is possible that some cameras give picture problems. When you have these
problems, check the Conceptronic site www.conceptronic.net and choose the
'2Tech' option for an explanation of the new drivers.
For other information of Ulead software you can consult the manual of Ulead on the
CD-ROM. Choose 'Tutorial' or 'Read me' to know more about all applications of the
software.
- 12 -