Klarstein ICEBLOCK PROSMART Mode D'emploi page 36

EN
Continuous drainage
If you plan to leave this unit unused for a long time, remove the rubber plug from the
drain hole at the bottom of the unit and drain all the water outside the device.
You can use continuous drainage with a drainage hose connected to the lower drain
opening when the unit is being used in heating mode.
Continuous drainage does not need to be used when operating the unit in cooling or
dehumidifying mode. The device can automatically evaporate the water condensation
through the spray motor. Make sure that the drainage holes are well drilled.
If the water spray motor is damaged, continuous drainage can be used. Connect the
drain hose to the lower drain opening. If the spray motor is damaged, intermittent
drainage can also be used. If, under these conditions, the water indicator lights up
completely, please connect a drain hose to the lower drain opening so that all the water
in the water tank will be drained outside the device. That way the device can also work
well.
36