Technical Data; Safety Instructions - Klarstein ICEBLOCK PROSMART Mode D'emploi

EN
26

TECHNICAL DATA

Item Number
Power supply
Cooling capacity
Refrigerant
Moisture removal
Application area
Minimum room area
WiFi standard
WiFi frequency
WiFi radio-frequency
power (max.)

SAFETY INSTRUCTIONS

General Safety Instructions
• The air conditioner is only suitable for indoor use and not for other applications.
• Follow the local mains connection regulations when installing the air conditioner.
Make sure it is properly grounded. If you have questions about the electrical
installation, follow the manufacturer's instructions. Hire a trained electrician if
necessary.
• Make sure that the power plug is intact and firmly plugged in after the air
conditioner is installed. Install the power cord properly to prevent someone from
stumbling over or accidentally pulling out the plug.
• Do not place objects in the air inlet or outlet. Keep the air inlet opening free of
objects.
• If the drain lines are installed, make sure that the lines are connected properly and
are not twisted or kinked.
• While adjusting the upper and lower air vents of the air outlet, gently pull them with
your hands to prevent damage.
• Make sure the unit is upright when moving it.
• Do not disassemble the device. Do not modify or adjust the device on your own,
otherwise it may malfunction or even damage people and property. Contact
the manufacturer or service personnel for a repair to prevent any dangers of
malfunction.
• Do not pull the plug out to turn off the power.
10034643
220-240 V ~50 Hz
9000 Btu/h ~2.6 kW
R290
1 l/h
26-44 m
2
12 m
2
802.1 1 b/g/n
2,4 GHz
20 dBm
10034645
12000 Btu/h ~3.5 kW
1.2 l/h
35-59 m
2
15 m
2