Health O Meter 499KL Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS (CONTINUED)
5. Place scale platform C on its
side and place Column B on its
side, perpendicular to the
platform. The front of the
display head on Column A
should be facing forward and
above scale platform C.
6. Carefully pull the cable
connector from the bottom of
Column B and plug into the RJ
jack on scale platform C.
Caution: Once connected,
keep a firm grip on the
columns to ensure the load
cell connector cable is not
pulled out from the RJ jack.
This cable connects the load
cells to the display head and
must be entirely plugged in
for the scale to function
properly.
P/N UM499KL 499KG Rev 20190430_Web
Column B
RJ Jack
9
Column A