Advanced Setup; Adv Menu 01 - Lock/Un-Lock User Keys; Adv Menu 02 - Calibration Mode Enable; Adv Menu 03 - Spl/Dolby Display For 0Db Gain - CB ELECTRONICS TMC-1 Manuel De Référence

Advanced Setup

From the Setup Menu, depress the [Select] key and then the [>] key to Enter the Advanced
Menu or [Select] and [Setup] to enter directly.
Adv Menu 01 – Lock/Un-Lock User Keys
Un-Locked
Unlocked: The user key function can be changed by holding Select down and repeated
depressions of the selected user key.
Locked: The user key functions cannot be changed
Adv Menu 02 – Calibration Mode Enable
Adv Menu 02 – Calibration Enable
Lock All
Lock All Source Gain, Speaker Trim, Mono trim, 5.1 trim, Cal A and Cal B are Locked
Level 1 lock Source gain is locked on Main and Alt only, Cal A, Cal B and Mono trim's are
Unlocked
Unlock All Source Gain, Speaker Trim, Mono Trim, 5.1 trim Cal Trim and 5.1 trim are
enabled to allow SPL Setting and user preferences
Adv Menu 03 – SPL/DOLBY Display for 0dB Gain
Adv Menu 03 – SPL Display @ 0dB Gain
85 83 81
Select the SPL (Dolby) display for 0dB Gain, for film this is 85, for Home cinema 79 and
some broadcast 68.
This is used to optimise the signal to noise of the XMon. Once selected then the room can
be calibrated.
Set before calibrating the room!
Adv Menu 04 – External T/B Dim
When the external Talkback microphone does not cause feedback, you can disable the Dim
on Talkback function.
On: Dim Control Room Speakers when External Talkback is enabled
2018 CB Electronics
TMC-1 Manuel de référence
Adv Menu 01 - User Keys
79 77 75
Adv Menu 04 - Ext T/B Dim
On
49
Level 1 lock
73 71 69
Locked
Unlock All
67 65 63
Off
Version 7