Operation; Control Panel; High Temperature Alarm - Electrolux GT292 Notice D'utilisation

54 www.electrolux.com

3. OPERATION

3.1 Control panel

High temperature alarm light
1
Power indicator light
2
ActionFreeze light
3
3.2 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up.
If the temperature inside the
appliance is too high the
Alarm light will blink. Active
the ActionFreeze function.
3.3 Switching off
Turn the Temperature regulator to the
OFF position.
3.4 Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
• to obtain the minimum coldness, turn
the Temperature regulator towards
.
1 2 3 4
ActionFreeze switch and Alarm reset
4
• to obtain the maximum coldness, turn
the Temperature regulator towards
.
A medium setting is
generally the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature
• how often the lid is
opened
• the quantity of food
stored
• the location of the
appliance.

3.5 High temperature alarm

An increase in the temperature in the
freezer (for example due to an power
failure) is indicated by:
• switching on of the Alarm light
• sounding of buzzer
During the alarm phase, the buzzer can
be switched off by pressing the Alarm
reset switch.
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.