Customer Service - Wood's Airmaster WOZ400 Guide D'instructions

Operating Instructions
GB
Troubleshooting
PROBLEM
The device does not switch on and the power
switch does not light up.
The device is operating but not producing
ozone.
Loud fan noise.
The machine is behaving strangely.
The machine settings (e.g. timer) are incorrect
Contact your local dealer after you have worked through the above troubleshooting list or if your project requires a service.
Warranties
2- year factory warranty covering workmanship. Please note, the
warranty is valid only on presentation of a receipt. The warranty
is valid only if the product is used in accordance with the instruc-
tions and safety warnings in this manual. The warranty does not
cover damage caused by incorrect use of the product.

CUSTOMER SERVICE

Always use original parts.
Make sure you have the following to hand when you
contact our customer service team: Model designation,
receipt and serial number.
14
CAUSE
Power supply problem.
The fuse is broken (WOZ3000/6000).
The power adapter is broken (not WOZ400).
The ozone pipe has reached the end of its life or
is broken.
The prefilter is dirty/clogged.
The software has hanged.
The machine has been set accidentally.
Note that all information, safety instructions and
technical data in this manual may be amended.
REMEDY
Connect the device to a functioning power
socket and switch it on.
Replace the fuse.
Try a different power adapter (making
sure that the adapter is to the correct
specification).
Replace the ozone pipe.
Replace the filter.
Perform a factory reset.
NOTE:
Register your product at www.warranty-
woods.com to benefit from the special Wood's
offers available for your product.
Take a look at www.woods.se for more
information.
.