Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
11. COOLING VENTS
These holes are using to refresh the built-in power amplifier. don't obstruct this part
12. AC SOCKET
Before to connect the ac cord on this socket, make sure that the available voltage is not higher than stated at the end of this
manual
13. COOLING FAN
This fan is used used to refresh power amplifier. don't obstruct these parts
14. POWER SWITCH
This switch is used to to switch the subwoofer built-in power amplifier on or off.
15. POWER SUPPLY SELEC
The main power supply is different between country ( in france :220V ). Select the good value with the switch ( 110V or 220V )
TECHNICAL SPECIFICATIONS
X12A :
Ways:
Woofer :
Tweeter :
Frequency Range (-10 dB) :
RMS Power Rating :
Impedance :
Max SPL :
System Sensitivity (1w/1m) :
Input sensitivity :
Distortion :
Damping factor :
Protection :
Power supply :
Enclosure :
Dimensions (D x W x H) :
Net Weight :
© Copyright LOTRONIC 2014
2
12'' ( 31cm )
1,34''
55 Hz - 20KHz
350 W
8 ohms
120 dB SPL peak
96 dB SPL
1.2V
<0,5%
>200
Soft start, short circuit, overheating
AC110-120V / 220-230V / 50-60Hz
ABS
378 mm x 358 mm x 580 mm
18,65 kg
X12A-X15A
Page 4
Publicité
Table des Matières
