BST X12A Manuel D'utilisation page 3

DESCRIPTION
8 HIGH TONE CONTROL
This control is used to adjust high frequencies of master signal
9. MID TONE CONTROL
This control is used to adjust mid frequencies of master signal
10. LOW TONE CONTROL
This control is used to adjust low frequencies of master signal
© Copyright LOTRONIC 2014
1. MIC INPUT CONTROL
Used to adjust level of Mic input
2. MIC INPUT
Connect on this socket (Jack) a microphone
3. LINE INPUT CONTROL
Used to adjust level of line input
4. LINE INPUT
Connect on this socket (Combo XLR-Jack) a line device
as cd player, dvd player, mixer,...
5. LINE INPUT
Connect on this socket (Cinch) a line device as cd player,
dvd player, mixer,...
6. INDICATORS
- The power led lights on when you switch the speaker on
- The SIG led give you in information about level of signal.
If the led is off, that means the level is low
if the led flashes, that mean the level is good.
If the led lights on, that mean the level is good but near
from it max level
- The clip led lights on when the level is too high. in this
case, decrease the level
7. LINK OUTPUT
Connect on this output an other activ speaker or an
external power amplifier.
X12A-X15A Page 3