Troubleshooting - Klarstein 10030684 Mode D'emploi

Problem
After connecting the power
and pressing the "power"
key, the appliance has no
response.
Heating being interrupted
in normal use and a "Beep"
will be heard.
No operation during the
heating being in use.
Errot Codes
E0
E1
E2
E3
E4
E5
E6
E7

Troubleshooting

Possible Cause
Is the electricity in suspension?
Is the fuse broken down?
Der Stecker ist nicht richtig
eingesteckt.
Incompatible cookware or no
cookware is used?
Is the cookware not considerably
placed form the center of the heating
zone?
Is the cookware being heated but
continually being removed?
Is the cookware empty or the
temperature too high?
Is the air intake/exhaust vent clogged
or dirt has accumulated?
Is the cooker working over 2 hours
without any external instruction?
Internal circuit error
Without cookware or Incompatible
cookware used
Internal overheat
Over-voltage
Under-Voltage
Top plate sensor open/short circuit
IGBT sensor open circuit/short circuit
Top plate overheat
Solution
Use after resuming the electricity.
Check the root causes carefully. If
the problem cannot be fixed, please
contact Service Centre for checking
and repairing.
Replace compatible cookware for the
induction cooker.
Place the cookware at the center of
the defined heating zone.
Place a cookware inside the heating
zone.
Please check whether the appliance
is being misused.
Remove the stuff clogging the air
intake/exhaust vent. Operate the
appliance again after cooling down.
Reset cooking modes or use timer
function.
When showing error signal E1, E2
and E7, please check whether the
cookware is not suitable, or switch on
the appliance again after it is cooled
down naturally. When showing E0,
E3-E6, please contact service Centre
for checking and repairing.
12