HoMedics MCS-1005HJ Mode D'emploi page 9

DEMO
For a brief demonstration of the features of the massage
cushion, press the DEMO button. The LED light will
illuminate to indicate active function. The unit will briefly
go through each function. Once completed, the unit will
automatically turn off.
MODE
Choose from rolling, shiatsu, tapping, or shiatsu and
tapping combined. Press the MODE button and the
corresponding LED on the selected massage style will
illuminate.
ROLLING MASSAGE
Rolling massage simulates 2 hands pressing firmly and slowly
traveling up and down your back.
SHIATSU MASSAGE
Shiatsu is a deep-kneading massage. During this function, the
massage nodes will rotate while traveling up and down your back,
soothing tense muscles.
TAPPING MASSAGE
Tapping is a fast, invigorating massage.
NECK AND BACK SPOT MASSAGE
While the unit is in shiatsu mode, press either SPOT button
to stop and focus the shiatsu action in one place. Once
the unit is operating in spot massage, you may adjust the
mechanism position by holding down either button until
the desired position is reached. The up arrow will move
the mechanism upward and the down arrow will move it
downward. Once you release the button, the mechanism will
stop in that place.
HEAT
This massage cushion is equipped with heat in the neck,
back, and seat cushion. For soothing heat, when massage
is on, press the HEAT button and the corresponding red LED
light will illuminate. To deselect, press the button again and
the corresponding LED will turn off. Heat will only work when
the massage feature is on.
9