Helios KWL-BE Mode D'emploi page 13

Operating instructions
Slide switch controller KWL-BE
UK
2.2 Errors, info and warnings through "Blinkcode"
A unit fault is indicated by the integrated light-emitting diode (LED) on the controller
(Fig.1,Ž).
– The following warning and alarm indicators are defined:
In relation to Blinkcode, the LED blinks 32 times in quick succession (approx. 100 msec).
There is a 4 second pause after each cycle (32 blinks). A total of 32 possible errors can
be represented. The error to be displayed is represented in the cycle by longer blinks (ap-
prox. 500 msec.
Fault example for >Error< 2 and 9:
.....
The fault indicators >Info< and >Warning< are represented in the same way, i.e.:
LED >> Info = green
LED >> Warning = yellow
Reset error messages, information messages, warnings
The controller can be RESET via the slide switch. For this purpose, slide the switch
up and down twice. This must take place within 1 second.
3