Tripp-Lite BP Serie Manuel De L'utilisateur page 4

200801218 93-2487 BP External BP OM.qxd
Mounting (Rack)
2-Post (Telecom) Mounting
Select external battery pack models include the hardware required for 2-post mounting. If this
hardware did not come with your unit, a 2-Post Rackmount Installation Kit (Model
2POSTRMKITWM) may be ordered separately from Tripp Lite. Refer to the illustrations
below for specific installation instructions covering 2U, 3U and 4U battery packs.
2U
X 8
1
3U
X 8
1
4U
X 8
1
Important: Illustrations show the most typical installation configurations; your model
may vary. Use only the pre-drilled screw holes to attach mounting brackets to the sides
of the battery pack. When installing battery packs into the rack, ensure that the weight
of the unit is evenly distributed.
2/28/2008
continued
2U
X 4
2
3U
X 4
2
4U
X 4
2
4
11:42 AM Page 4
3 X 2 X 2 X 2
X 4
3
3 X 4