Data Extraction; Printing The Data Stored In The Lrf-04; Obtaining Data Stored With A Pc - CESVA LRF-04 Manuel D'instructions

- TOTAL COUNTERS: This option allows you to consult the total counters, which are the
following: emission exceeded (in seconds), reception exceeded (in seconds), sensor
inactive (in seconds) and total number of deletions.
VERSION AND SERIAL NUMBERS: Showing the version and serial numbers of the
-
LRF-04.

5. DATA EXTRACTION

As we saw in the previous chapter, all the data stored in the LRF-04 can be consulted on
screen from the keyboard. This information may also be printed out by a parallel printer or
transferred to a PC via USB connection or modem

5.1 Printing the data stored in the LRF-04

With the numerical keyboard and the LCD display it is possible to print the programming and
all the data stored in the LRF-04 as follows:
•
Connect a printer to the PRINTER output of the LRF-04.
•
Press PRINT (F) on the numerical keyboard. The printing menu will appear on the LCD
screen.
•
To move around the printing menu use the arrow keys (A) and (B). To select an option,
press ENTER (C) and to quit an option press ESCAPE (E).
•
While printing is in progress, the LRF-04 continues to function, and after two minutes
without any key being pressed the LRF-04 automatically quits the printing menu.
•
The printing menu has the following options:
Programming: This allows you to print a report containing all the parameters
-
programmed in the LRF-04.
LeqT Reports: Use this option to print all the LeqT records stored in the LRF-04. For
-
greater convenience, first introduce the printing interval (date and time of beginning
and end).
Session records: This option prints all the session records stored in the LRF-04
-
belonging to a specific interval.

5.2 Obtaining data stored with a PC

All the data stored in the LRF-04 may be retrieved in a PC via USB connection or modem.
These operations may be carried out by using the software specially designed for the
purpose. The software is available for free on
IMPORTANT: Before communicating the LRF-04 and a PC for the first time, it is necessary
to install the CESVA USB driver. You can find this driver at CESVA's website
(www.cesva.com). Following the instructions given in this website, the installation will be
easy and simple.
.
www.cesva.com (support and download).
34