NETGEAR Powerline 1000 PL1000 Guide Rapide page 7

Install Your Adapters
¾ To install your Powerline adapters:
1. Plug a Powerline adapter into a power outlet near your router.
Note:
Do not plug your Powerline adapters into extension
cords, power strips, or surge protectors.
2. Use an Ethernet cable to connect the Powerline adapter to a
LAN port on your router.
Room 1
3. Plug the second Powerline adapter into a power outlet in the
location where you want to add Internet access.
4. Wait until the Pick A Plug LEDs are lit.
5. Use an Ethernet cable to connect a computer or other device
to the Powerline adapter.
Room 2
7