Technical D Atat Echnical Data - Zenoah CHT220L Manuel D'utilisation

Technical data
Technical data
Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. speed, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
Weight
Weight without fuel, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Sound levels
(see note 2)
Equivalent sound pressure level at the operator's ear, measured
according to EN ISO 10517, dB(A):
Vibration levels
(see note 3)
Equivalent vibration levels (a
2
ISO 10517, m/s
Front/rear handles:
Blades
Type
Length, mm
Blade speed, cuts/min
Note 1: Noise emissions in the environment measured as sound power (L
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the
highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
20 – English
TECHNICAL DATA
3
dB(A)
WA
) at handles, measured according to EN
hv,eq
CHT220L
21,7
32
27
2800
9000
0,6/7800
Yes
Yes
NGK CMR6A
0,5
0,3
4,9
100
101
93
3,7/3,9
Double sided
590
4050
) in conformity with EC directive 2000/14/
WA
2
.