Important Warning - Robot Coupe Blixer 3 D Serie Notice D'instruction

WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to
misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will
help you know your appliance and enable you to use the equipment correctly. The operation manual should be kept within easy
access to all users for reference and should be read completely by all first time users of the machine.
• Carefully remove the equipment from the packaging
and take out all the boxes or packets containing
attachments or specific items.
• WARNING: some of the parts are very sharp e.
g. blades... etc.
INSTALLATION
• We recommend that you install your machine on
a stable solid base at a comfortable working height.
• Machine must be operated and stored in a location
not subject to water drips or spray or explosive
vapors.
CONNECTION
• Always check that your power supply corresponds
to that indicated on the serial number plate and that
it is properly sized.
• Always connect the machine to a grounded outlet
with GFCI (ground fault circuit interrupt) protection.
• Always wear cut-resistant gloves when handling
the cutter blade.

IMPORTANT WARNING

UNPACKING
• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
• The machine must not be modified in any way
from its original configuration.
• Operating times of 5 minutes or longer can
cause processed food to increase to temperatures
above 125° F (52° C).
• Never tamper with, or defeat the purpose of
the locking and safety systems.
• Do not put nonfood objects in the bowl
• Do not leave the machine running unattended.
• Always unplug your machine before cleaning.
• Always clean the machine and attachments at
the end of each use.
HANDLING
• Never place the motor unit in water.
• For par ts made of aluminum alloys, use
cleaning detergents suitable for aluminum.
ASSEMBLY PROCEDURES
USE
CLEANING
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
• For plastic parts, do not use detergents that are
too alkaline (i.e., containing too much caustic soda
or ammonia...).
Robot Coupe can in no way be held responsible
for the user's failure to follow the basic rules of
cleaning and maintenance.
MAINTENANCE
• Always unplug the appliance before servicing.
• Check the seals regularly and ensure that the
safety devices are in good working order.
• It is particularly important to maintain and
check the attachments since certain products
contain corrosive agents e.g. citric acid.
• NOTICE: Never operate the appliance if the
power cord or plug has been damaged.
• If the machine fails to operate as described in
this manual, or if the machine malfunctions in any
way, remove the machine from use and have it
serviced. Additionally, discard all food processed
at the time of the malfunction.
• Contact your local Authorized Service Agency if
something appears to be wrong.
W A R N I N G