osann JET Mode D'emploi page 24

Installation rearward-facing for 0-18 KG
3
4
This child seat can be used with the harness for children less than 18KG in weight, installed rear-
ward-facing using Isofix anchorage.
For child weight less than 9KG, only can installed rearward-facing position.
Step 3: Secure the backrest on the Isofix base rearward-facing and adjust the child seat to position
4, which is the most reclining position (See picture3). Meanwhile check to make sure the backrest is
securely latched with the ISOFIX base and the child seat latching indication shows Green.
Step 4: Press the Isofix pushbutton and push the isofix base towards the car seat backrest until it is
firmly pressed against the car seat backrest.
Step 5: Press the supporting leg adjuster button, and adjust the length of support leg to suitable
for different height of car seat. Important: Make sure the bottom of the support leg touch the
ground completely.
click!
Child seat latching
indication window shows
green
5
EN