MS ROME Notice De Montage page 60

INSTALLATION IN THE VEHICLE
Squeeze the support leg
adjusting button, slide the
support leg block upwards.
Remove the baby insert, loosen the shoulder
straps by pressing the harness adjusting button
and pull the harness shoulder as far forward as
possible.
For group II/III, buckle will
be not used any more.
Place the harness buckle
to slot A.
7.3. 8
Place the shoulder strap behind the headrest cover, open the cover
of buckle storage, assemble the buckle properly, then put it in the
storage and close finally.
CAUTION
Only upright position is available if child's weight is over 25kg.
60
7.3. 5
7.3. 7
A
B
7. 3. 6