MS ROME Notice De Montage page 49

6.3. Harness system & Headrest adjust
Loosen the shoulder straps by pressing the
harness adjusting button and pull the shoulder
straps as far forward as possible.
Pull the headrest adjusting loop to adjust the
headrest upwards, pull the headrest adjusting
loop and push the headrest back to slide the
headrest downwards.
Before installing the baby car seat into your vehicle, please
move the headrest to the correct height for your baby/child and
check that it is properly engaged by lightly sliding the headrest
down.
There are 12 adjustable headrest positions (7 positions for
group 0+/I; 5 positions for group II/III).Please adjust the headrest
height to close to your baby/child shoulder position, i f at the mi-
ddle of two positions, please use the higher position.
SECURING YOUR BABY
5. 3. 1
5. 3. 2
49 49 49 49