Configuring The Basic Settings In Initial Setup - Samsung 9 Serie Guide De L'utilisateur

When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the TV's basic settings. Plug the power cord into a wall outlet, and then press the
turn on the TV.
Use the standard remote to run the Initial Setup.
✎
Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 23).
✎
To return to the previous step in the Setup sequence, select Previous.
✎
If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna
✎
or cable connection before you turn on the TV. See page 11 for instructions.
If you want to configure a wired network connection during Setup, make sure you've connected a
✎
LAN cable to your TV. See pages 35 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
1
Menu Language:
Select a Language.
2
Use Mode: Select
the Home Use
Mode.
3
Network Settings:
Configure the
network settings.
To configure
✎
later, select Skip.
You can set up
the network
connection later
using the on-
screen Network
menu.

Configuring the Basic Settings in Initial Setup

After you press the
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select Next. The TV will
display on-screen menus using the language you select beginning with
the next step in the Setup process.
On the Use Mode screen, select the Home Use using your remote, and
then select Next. The Network Settings screen appears.
Store Demo is for retail environments only. If you select Store
✎
Demo, some functions will not work, and the TV will reset all
functions to their factory default after a certain period of time. For
more information about Store Demo, go to the end of this section.
To configure your network settings, select Next using your remote, and
then go to 3A - Wireless Network or 3B - Wired Network on the next
page.
If you do not know your network configuration information or want to
configure the settings later, or do not have a network, select Skip, and
then go to 5 - Auto Program (1) on page 17.
To configure network settings later, refer to "Setting up the Wired or
Wireless Network" in the e-Manual or see the Network Connection
sections in this manual (pages 34 and 36).
English - 15
button, the Start screen appears. Select Next
P
button to
P