Klarstein NEW BREEZE Mode D'emploi page 41

9 TEMP / Temperature setting
Press this button to show the set temperature, indoor temperature or outdoor temperature
on the display.
no display
No display
no display
• Selection of no display on the remote control: display of the set temperature.
no display
• Selection of on the remote control: display of the internal temperature.
• Selection of on the remote control: display of the outside temperature.
Note: On some models, the outside temperature cannot be displayed. Display only
for models with a two-digit display.
10 TIMER / automatic timer
Automatic switch-off: when the device is switched on: press this button to set the
automatic switch-off. 'HOUR' and 'OFF' will flash on the display. Press the [+] and [-]
buttons within 5 seconds to set the time for the shutdown. Pressing [+] and [-] increases
or decreases the time by 1/2 hour. If you hold down [+] and [-] for 2 seconds, the time
value changes quickly. Then press TIMER to confirm. 'T-OFF' and 'H' will no longer
flash.
Automatic switch-on: when the device is switched off: press this button to set the
automatic switch-on. 'T-OFF' and 'H' will flash on the display. Press the [+] and [-]
buttons within 5 seconds to set the time for switching on. Pressing [+] and [-] increases or
decreases the time by 1/2 hour. If you hold down [+] or [-] for 2 seconds, the time value
changes quickly. Then press TIMER to confirm.
Note: The setting range is 0.5-24 hours. The time interval between two entries must
not exceed 5 seconds, otherwise the remote control will leave the input mode.
EN
41