Vimar by-me Eikon 20557 Mode D'emploi page 27

• Once the beep has sounded, the door entryphone has
been coded and now needs to receive the ID number of
the device to be called . This is done by pressing any key
(e .g . lock or auxiliary function) on that device .
Button connection cable for intercom calls.
Up to 6 NO external door phone buttons can be installed
with the intercom call expansion cable . The maximum
number of intercom calls that can be handled is 6 . Connect
the auxiliary NO buttons as follows:
Call wire (red, green or blue)
Black wire
The expansion cable that comes with the speakerphone
measures about 20 cm .
NO button contact .
NO button contact return
WARNING: Isolate any wires of the enclosed connection
cable that are not used for the NO buttons to prevent con-
tacts that will create false intercom calls .
The primary functions and entry phone options can also be
set using the USB interface and the "SaveProg" software .
23 - ENGLISH