Secondary Coding (Group Calls) - Vimar by-me Eikon 20557 Mode D'emploi

button to be associated with the speakerphone (panel
with buttons) .
- a personal computer and USB Interface and dedicated
"SaveProg" software .
As procedure differ for varying coding tools, see the
technical documentation for instructions regarding cod-
ing the door entry system .
• When the code is sent, the entry phone beeps to confirm
that coding has taken place; The code is then saved by
the device and remains the same until a new configura-
tion is input .
Even in the event of a power failure, the code remains as
before .
20 - ENGLISH

SECONDARY CODING (Group Calls)

The same call can be sent to one or more door/video entry
phones at the same time ("group call") in such a way that
if the "master" is called, the call can be answered from all
the door/video entry phones belonging to the group . The
"master" is a directly coded door/video entry phone that is
linked to a call from an external entrance plate .
f you want to program the video door entryphone as a sec-
ondary one of a certain master, press the configuration but-
ton "R" located below the ringtone volume trimmer (figure 2)
then press and hold down the lock and auxiliary buttons "C"
and "B" for at least 3 seconds until you hear a beep . You
can now release buttons "C" and "B" . From the plate, press
the corresponding push button or enter the number of the
master; the secondary will automatically acquire the ID code
referring to the master .