Swing Setting - Danby DPA120HB1WDB Manuel D'instructions

2
1
1
Dehumidifying Setting
Ensure the unit is plugged in and has power.
The OPERATION indicator on the display
panel of the unit illuminates.
1. Press the MODE button until DRY mode s i
selected.
2. Press the TEMP button to set the desired
temperature. The temperature can be set within a
range of 17°C (62°F) to 30°C (86°F) by 1°C (2°F)
3
increments.
3. Press the
ing mode.

Swing Setting

Use the button to adjust the Up/Down
airflow direction .
1. If the button is held down for more than
2 seconds, the auto-swing feature of the louver
is activated. The horizontal louver will swing
up/down automatically. Press it again to stop.
NOTE: When the louver swings or moves to a
position which would affect the cooling
ability of the air conditioner,
automatically change the swing/ moving
direction.
8
button to start dehumidify-
it will